深圳市鼎达信装备有限公司

扫一扫关注

MB30-NBR-M10*1.5-AG波纹圆真空吸盘

点击图片查看原图
 
起批 1-10件 11-50件 50件以上
价格 170.50 136.40 85.25
销量: 累计出售 0
评价: 已有 0 条评价
人气: 已有 66 人关注
更新: 2018-10-25
数量: 减少 增加件 库存1000件
立即购买   加入购物车   3D模型下载
 
联系信息






 
  • 吸盘直径:30mm
  • 接头尺寸:M10*1.5外螺纹
  • 产品编码:100951
SAB 30 NBR-60 M10-AG
Attribute Value
dn 4 mm
D1 32 mm
Dmax(S) 34 mm
Ds 30.6 mm
G1 M10-M
H 28 mm
LG1 12 mm
SW1 17 mm
Z (Stroke) 9 mm
Attribute Value
Suction force 22 N
Pull-off force 33 N
Lateral force 30 N
Lateral force (oily surface) 13 N
Volume 5.73 cm³
Curve radius (min) (convex) 40 mm
Hose diameter (empf.) d 4 mm
Size 30
Suction cup material Nitrile rubber NBR
Material hardness [Shore A] 60
Weight 26.6 g
Product family MB
Number of folds 1.5
Note: Suction force: The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a smooth, dry workpiece surface - they do not include a safety factor Lateral force: The specified lateral forces are values measured at a vacuum of -0.6 bar with a dry or oily, smooth, flat workpiece surface. Depending on the workpiece surface and its quality, the actual values may deviate from these values Hose diameter: The recommended hose diameter refers to a hose length of approx. 2 m

© Copyright 深圳市鼎达信装备有限公司 版权所有 2005-2016. All Rights Reserved.
声明:本站内容仅供参考,具体参数请咨询我们工程师!鼎达信作为创新真空产品研发制造商,我们提供海绵吸具,海绵吸盘,真空吸盘,真空发生器,真空泵,真空鼓风机,缓冲支杆,真空配件,真空吊具等等产品

粤ICP备17119653号-1