![FSG 9 HT1-60 G1/8-IG](http://www.dingdx.com/file/upload/201811/07/161143378.jpg)
Attribute | Value |
---|---|
d2 | 4.1 mm |
dn | 3.5 mm |
Dmax(S) | 9.5 mm |
Ds | 9 mm |
G1 | G1/8"-IG |
H | 27 mm |
LG1 | 8.5 mm |
SW1 | 14 mm |
Z (Stroke) | 3 mm |
Note: Acceptable dimensional tolerances for rubber parts concerning to DIN ISO 3302-1 M3
Attribute | Value |
---|---|
Suction force | 0.79 N |
Pull-off force | 2.3 N |
Volume | 0.15 cm³ |
Curve radius (min) (convex) | 10 mm |
Hose diameter (empf.) d | 4 mm |
Size | 9 |
Number of folds | 2.5 |
Suction cup material | High temp material HT1 |
Material hardness [Shore A] | 60 |
Weight | 4.9 g |
Product family | TGBS |
Note: Suction force: The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a smooth, dry workpiece surface - they do not include a safety factor Pull-off force: The pull-off force of the versions made of natural rubber is reduced by about 40% Hose diameter: The recommended hose diameter refers to a hose length of approx. 2 m